Pool safety laws by state
Which pools need a barrier, whether you must register it, how often it’s inspected, and what you need before you sell or rent out the home, from each state’s regulator.
Every state and territory: a pool or spa that can hold about 30 cm (300 mm) of water needs a safety barrier.
In most states that includes portable and inflatable pools (NT: properties under 1.8 hectares). Keep the gate shut; never prop it open.
Selling or renting out a home with a pool
- Certificate needed to sell or lease
- Pool information must be disclosed
- Older pools must be brought up to standard on sale
- No sale or lease rule on the pages we checked
Not to scale. SA: pools built before 1 July 1993 on homes sold since 1 October 2008.
Victoria and WA
A pool barrier gets checked every 4 years: by a registered building surveyor or inspector in Victoria, by the council in WA.
2 years
is how long a Queensland pool safety certificate lasts (1 year for a shared pool). You need one to sell or lease.
1 May 2028
is when ACT pool barriers must meet the new standards. Pool information already has to be disclosed on sale or lease.
The rules side by side
| State | Register your pool | Inspections | Selling or leasing |
|---|---|---|---|
| New South Wales | Every pool and spa owner must register on the NSW Swimming Pool Register. | Councils run barrier inspection programs. Pools at moveable dwellings and tourist accommodation are inspected every 3 years. You can ask your council for an inspection before you sell or lease. | Sale: the contract must include a pool register certificate and a recent occupation certificate, certificate of compliance or certificate of non-compliance. Lease: you need a certificate of compliance or occupation certificate; a certificate of non-compliance isn’t enough to rent the home out. |
| Victoria | Register with your local council. A relocatable pool must be registered by the 4th day after it’s set up, if it stays up for 3 days or more. | Lodge a certificate of barrier compliance within 30 days of registering, then every 4 years. Only registered building surveyors, registered building inspectors or municipal building surveyors can inspect. | Not stated on the pages we checked. |
| Queensland | Pools must be on the QBCC pool register. | No regular state inspection is stated. Pool safety inspectors issue pool safety certificates, and councils can inspect and act on reports of unsafe pools. | You need a pool safety certificate to sell or lease, if there isn’t a current one. It lasts 2 years (1 year for a shared pool). Selling without one: lodge a Form 36 with QBCC and give the buyer a copy before settlement. |
| Western Australia | Not stated on the pages we checked. | Your local government must inspect your pool barrier at least every 4 years, and can charge for it. New pools are inspected within 30 days of the council learning they’re finished. | Not stated on the pages we checked. |
| South Australia | Not stated on the pages we checked. | Councils inspect new pools and spas within two months. Existing pools don’t have to be inspected, though an accredited professional is recommended. | If a pool built before 1 July 1993 is on a property sold after 1 October 2008, its barriers must meet Ministerial Building Standard MBS 004 before settlement. |
| Tasmania | Not stated on the pages we checked. | Inflatable and relocatable pools can only be set up once the barrier is installed and checked by a licensed building surveyor. | Not stated on the pages we checked. |
| Australian Capital Territory | Not stated on the pages we checked. | Compliance certificates come from an authorised person, such as a licensed building surveyor. Pools built or altered before 1 May 2013 need a compliance certificate by 1 May 2028, lodged with the ACT Government within 30 days of issue. | You must disclose pool information when you sell or lease. The scheme started on 1 May 2024 with a four-year transition: barriers must meet the prescribed standards from 1 May 2028. |
| Northern Territory | Not stated on the pages we checked. | A pool safety adviser inspects the barrier, and the Swimming Pool Safety Authority issues a compliance certificate. | Sale (pools built after 1 January 2003): the seller gives a copy of the compliance certificate to the Land Titles Office, and the buyer must have it reissued in their name. Lease: the owner must hold a compliance certificate or acknowledgement notice in their name. |
From official pages, checked 19 November 2026.
State by state, including barrier rules
New South Wales
- Which pools
- Pools and spas that can be filled to 300 mm (30 cm) or more must have a safety barrier.
- Barrier and gate
- Doors and gates to the pool must be kept closed. Gates must swing outwards, shut automatically and latch themselves, and must never be propped open.
- Penalties
- Woollahra Council says not registering can mean a $220 fine, or up to $2,200 in court.
- Who to contact
- Your local council.
Sources: NSW Government: Pool owner obligations; Woollahra Municipal Council: Private swimming pools and spas
Victoria
- Which pools
- Pools and spas that can hold more than 300 mm (30 cm) of water need a barrier and must be registered. Inflatable pools that need no assembly beyond inflating don’t need a barrier.
- Barrier and gate
- The barrier must meet the applicable barrier standard. Gates and doors must stay closed except when someone is going through; a gate that can’t fully close doesn’t comply.
- Penalties
- Fines apply; the Victorian Building Authority’s pages give different amounts.
- Who to contact
- Your local council.
Sources: Victorian Building Authority: Registration requirements; Victorian Building Authority: Inspections and compliance; Victorian Building Authority: Swimming pools and spas
Queensland
- Which pools
- Pools that can be filled to 300 mm or more, including wading and blow-up pools, spas and portable pools.
- Barrier and gate
- Fences at least 1200 mm high. Gates must not open towards the pool, and must close and latch themselves from any open position; the outside latch release must be at least 1500 mm above the ground.
- Penalties
- Fines can apply for not registering and for non-compliant barriers; amounts aren’t stated.
- Who to contact
- QBCC, or your local council to report an unsafe pool.
Sources: QBCC: Swimming pool safety laws; QBCC: Register a pool; QBCC: Selling or leasing a property with a pool; QBCC: Pool fences; QBCC: Gates, latches and hinges; QBCC: Local council’s role in pool safety
Western Australia
- Which pools
- Private pools, spas and portable pools with water more than 300 mm (30 cm) deep need a safety barrier.
- Barrier and gate
- Australian Standards AS 1926.1-2012 and AS 1926.2-2007 (pools installed before 1 May 2016 can meet AS 1926.1-1993). Gates must never be propped open.
- Penalties
- Non-compliance can mean significant fines; amounts aren’t stated.
- Who to contact
- Your local government, or Building and Energy.
Sources: Building and Energy: Swimming pool and spa safety barrier requirements; WA Government: Councils urged to stay buoyant on pool barrier inspections
South Australia
- Which pools
- Pools holding 30 cm or more of water must have a compliant safety barrier. Above-ground and inflatable pool walls can count if they’re non-climbable and 1.2 m high.
- Barrier and gate
- At least 1.2 m high, and boundary fences at least 1.8 m on the pool side. Gates swing outward from the pool and shut themselves from any position, with a latch at least 1.5 m above the ground.
- Penalties
- Not stated on the pages we checked.
- Who to contact
- Your local council, or Consumer and Business Services.
Sources: SA Government: Pool and spa safety; Consumer and Business Services: Pool safety
Tasmania
- Which pools
- Pools and spas that hold 300 mm (30 cm) or more of water must have a safety barrier.
- Barrier and gate
- Australian Standard AS 1926.1-2012 (and AS 1926.2). Gates should close themselves properly and not be propped open.
- Penalties
- Not stated on the pages we checked.
- Who to contact
- A building surveyor.
Sources: CBOS Tasmania: Pool safety barriers
Australian Capital Territory
- Which pools
- Home pools and spas that can hold water deeper than 30 cm (300 mm).
- Barrier and gate
- From 1 May 2028, barriers must meet current standards.
- Penalties
- Offences apply if barriers aren’t maintained; amounts aren’t stated.
- Who to contact
- An authorised person, such as a licensed building surveyor.
Northern Territory
- Which pools
- Pools and spas on residential properties under 1.8 hectares need a barrier and a compliance certificate before they’re filled with more than 30 cm of water. Wading pools holding 30 cm or more are covered too.
- Barrier and gate
- Not stated on the pages we checked.
- Penalties
- Not stated on the pages we checked.
- Who to contact
- The Pool Fencing Unit.
Sources: NT Government: Construct or install a swimming pool or spa; NT Government: Wading pools on residential properties; NT Government: Buying or selling property with pools or spas; NT Government: Pools or spas at rental properties
Getting a pool fence fixed
Put this on your site
Free for councils, pool builders and inspectors, real estate agents and news sites. It updates when the official rules change, and loads no trackers or cookies.
Cite or link to this page
Free to quote with a link. We update it when the official sources change.
General information, not legal or financial advice. Rules change; check the official page linked next to each point before you act.