Painting · cost guide

Deck Staining / Oiling cost in Australia

Clean, sand and apply two coats of stain or oil to a timber deck (20 to 30 m²). Here is what it typically costs, what is and isn't included, and how prices shift by city — then check your own quote against it.

Modelled estimate

$600–$2,500

Midpoint estimate: $1,550 per job

Sydney · Deck Staining / Oiling

Modelled estimate, not calculated from consumer submissions. GST included; city, suburb and materials differences are assumptions rather than observed prices. Confirm scope and inclusions with the provider.

How this figure is put together

Modelled estimate; verified submission count unavailable. These figures are not calculated from consumer submissions.

Modelled estimate. City, suburb and materials factors are assumptions, not observed price differences. Confirm GST, units and inclusions with the provider.

GST is included in this price basis.

No verified observation date for this model.

Existing guide assumptions; not a measured market sample or verified rate card.

Source and methodology

National guide, modelled from the Sydney baseline and adjusted by city below.

Materials

Materials are sometimes included and sometimes charged separately, so always confirm.

Stain often included; specify the product in the quote

GST & fees

Quotes usually include GST.

By city

Deck Staining / Oiling prices by city

City figures apply local cost-of-living adjustments to the national guide.

Deck Staining / Oiling by city

Modelled ranges, not observed prices. The spread between cities comes from a published city multiplier applied to the national range — it is an assumption about each market, not a measurement of it.

Bars span the modelled low to high for each city; the tick marks the midpoint. Highest: Sydney, $600$2,500. Lowest: Toowoomba, $468$1,950.
CityTypical rangeAround
Sydney$600$2,500$1,550
Melbourne$552$2,300$1,426
Brisbane$510$2,125$1,318
Perth$492$2,050$1,271
Adelaide$468$1,950$1,209
Canberra$558$2,325$1,442
Hobart$492$2,050$1,271
Darwin$528$2,200$1,364
Gold Coast$498$2,075$1,287
Toowoomba$468$1,950$1,209
Ballarat$504$2,100$1,302
Bendigo$498$2,075$1,287
Townsville$510$2,125$1,318
Mackay$552$2,300$1,426
Albury-Wodonga$480$2,000$1,240
Modelled estimate. This calculator’s price ranges use modelling assumptions, not observed local prices. Source and limitations.

Instant check

Check a painting quote in Sydney

Pick the job, enter a quote, and see how it compares to the modelled range. Free, no signup.

Before you book: what to ask →

The questions that pin down scope, plus the mistakes that cost people money.

Price drivers

What pushes a deck staining / oiling quote up

Modelled assumption: Surface prep (60% of the job)
High ceilings
Wallpaper removal
Premium paints
Lead paint

Estimate or verified?

Here deck staining / oiling prices on this page are modelled estimates using existing guide assumptions, without a reconciled source dataset. An observed range is published only when its numbers are computed from at least 10 eligible submissions with matching scope, tax and materials treatment. Quotes and paid invoices are kept separate. How we build estimates · Submit a price

Licensing

Who can legally do this job

Who licenses this work

Building and trade work, state by state

On a small screen, scroll across to see every column.

StateRegulator
NSWNSW Government – contractor qualificationsConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for NSW. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
VICBuilding and Plumbing CommissionConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for VIC. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
QLDQueensland Building and Construction CommissionConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for QLD. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
WABuilding and EnergyConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for WA. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
SAConsumer and Business ServicesConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for SA. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
TASConsumer, Building and Occupational ServicesConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for TAS. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
ACTAccess CanberraConfirm the licence, registration, contract and certificate requirements for this exact job with the official authority for ACT. This guide does not assert a dollar threshold or an exemption. For permits, ask the relevant council; for consumer-contract questions, consult the ACCC guidance.
NTBuilding Practitioners BoardConfirm the relevant Northern Territory licensing authority for this occupation. No licence rule or threshold is asserted here.

Rules without a checked source have been replaced with official pointers. Qualified trade review is pending; no universal licence exemption is asserted.

FAQ

Deck Staining / Oiling: common questions

Deck Staining / Oiling cost: how much should you pay?+
Deck Staining / Oiling typically costs $600 to $2,500 in Australia, with a modelled midpoint around $1,550. Clean, sand and apply two coats of stain or oil to a timber deck (20 to 30 m²).
Are materials included in the price?+
Materials are sometimes included and sometimes charged separately, so always confirm. Stain often included; specify the product in the quote
Is GST included?+
Quotes usually include GST.
How long does it take?+
A typical deck staining / oiling job takes around 6 hours, though access and complexity can change this.
Does the person doing deck staining / oiling need a licence?+
Check the official regulator for the location and exact scope of work. The links below are guidance pointers; no blanket licensing exemption or threshold is asserted here.
Is this price an estimate or based on real quotes?+
An estimate. The range uses the existing FairCost model assumptions at a Sydney baseline; the underlying source documents have not been reconciled, then adjusted by a published multiplier for each city. This job calculator uses modelled estimates. Any separately published observed cohort must pass the evidence rules in the methodology.

See the full painting picture

Know someone getting quotes for this?

Deck Staining / Oiling price updates

Register interest in pricing research for this job. Modelled estimates and qualifying reported prices are labelled separately. Update timing is not guaranteed.