Handyman Work Cost in Australia
Handyman Work in Australia has a modelled range of $70–$350, with a midpoint estimate of $210. See your city for local modelling assumptions and available evidence.
Independent source review pending. See the evidence card for any actual verification date.
$70–$350
Midpoint estimate: $210 per job
Handyman Work · Australia · Broad service estimate; confirm the job scope. Modelled estimate, not calculated from consumer submissions. GST treatment unknown; city, suburb and materials differences are assumptions rather than observed prices. Confirm scope and inclusions with the provider.
How this figure is put together
Estimate from our published model, labelled as such; method and city factors on the page.
Modelled estimate. City, suburb and materials factors are assumptions, not observed price differences. Confirm GST, units and inclusions with the provider.
GST treatment is unknown for this basis; confirm it with the provider.
No verified observation date for this model.
Existing guide assumptions; not a measured market sample or verified rate card.
How handyman work is priced in Australia
List each repair or installation and ask which tasks are within the provider qualifications and licence scope. Check specialist or regulated work with the relevant authority rather than treating a handyman booking as covering every trade.
Ask for attendance, labour, materials and disposal charges. If combining tasks, agree which fit the booking and what happens to unfinished work instead of assuming a half-day price covers the entire list.
Estimate or verified?
Here handyman work prices on this page are modelled estimates using existing guide assumptions, without a reconciled source dataset. An observed range is published only when its numbers are computed from at least 10 eligible submissions with matching scope, tax and materials treatment. Quotes and paid invoices are kept separate. How we build estimates · Submit a price
Handyman Work cost by city
Estimates by city, adjusted from the national range. Click your city for local detail and city-specific FAQ.
Handyman Work by city
Modelled ranges, not observed prices. The spread between cities comes from a published city multiplier applied to the national range — it is an assumption about each market, not a measurement of it.
On a small screen, scroll across to see every column.
Adelaide
Modelled estimate
See Adelaide estimate →
Toowoomba
Modelled estimate
See Toowoomba estimate →
Albury-Wodonga
Modelled estimate
See Albury-Wodonga estimate →
Perth
Modelled estimate
See Perth estimate →
Hobart
Modelled estimate
See Hobart estimate →
Gold Coast
Modelled estimate
See Gold Coast estimate →
Bendigo
Modelled estimate
See Bendigo estimate →
Ballarat
Modelled estimate
See Ballarat estimate →
Brisbane
Modelled estimate
See Brisbane estimate →
Townsville
Modelled estimate
See Townsville estimate →
Darwin
Modelled estimate
See Darwin estimate →
Melbourne
Modelled estimate
See Melbourne estimate →
Mackay
Modelled estimate
See Mackay estimate →
Canberra
Modelled estimate
See Canberra estimate →
Sydney
Modelled estimate
See Sydney estimate →
Common handyman work jobs and what they cost
National estimates (Sydney baseline). Each job has its own page with materials, GST and callout detail.
TV Wall Mounting
Wall-mount a TV including bracket install and cable management
$80–$220
Furniture Assembly
Flat-pack assembly — IKEA, Kmart, Bunnings furniture
$60–$200
Shelving Installation
Install wall-mounted shelves (per shelf or bay)
$90–$280
Door Repair / Realign
Fix sticking doors, realign hinges, replace door handles
$90–$280
Half-Day Rate (4 hours)
Bulk hourly booking for multiple small jobs
$250–$500
Full-Day Rate (8 hours)
Full day of handyman labour for ongoing projects
$450–$750
Price by type and size
National estimates. Actual prices vary by city, see your city above for local pricing.
Small job (<1hr)
Half day
Full day
Furniture assembly
Add-on pricing
| Add-on | Cost |
|---|---|
| Materials | $10–$20 |
| Tip run | $50–$100 |
| Picture hanging | $20–$40 |
What drives price up
Confirm these inclusions
- Labour
- Basic tools
- Minor hardware
Ask about separate charges
- Materials/parts
- Licensed work (electrical, plumbing)
- Structural mods
Questions to ask a handyman
Most overcharging hides in the scope, not the headline price. These pin down the deal before you commit; for items often charged separately, see Ask about separate charges. If a price changes after you agree, see your rights when a quote changes.
- 1
Is this a fixed quote or an estimate?
A quote is generally a fixed price for the scope described; an estimate is a guess that can change. Ask which one you are getting.
- 2
Can you put the full scope and the final price in writing before any work starts?
A written list gives both parties a scope to check before agreeing to the work.
- 3
If you find extra work on the day, will you stop and price it before doing it?
Agree that any variation is priced and approved before it starts, not added to the invoice afterwards.
- 4
How much deposit do you need, and when is the balance due?
Know what you pay up front and what triggers the final payment before you agree.
- 5
Is GST included in the price you have quoted?
Confirm whether the supplier is GST-registered and whether GST is included. Check the ATO for registration rules.
Three checks that take five minutes
Check the licence
For licensed trades, ask for the licence number and confirm it on your state's fair-trading or licensing site before you book. Requirements depend on the work and location; check the relevant regulator.
Confirm they're insured
Ask what insurance covers this work and check exclusions with the insurer. If an operator can't confirm it, that's a red flag.
Insist on a written quote
A fair quote itemises the scope, names what's excluded, and states whether GST is included. A written record makes the agreed scope easier to check.
Who is allowed to do handyman work in each state
Licensing is the first thing to check before comparing prices. An unlicensed quote for licensed work is not a quote you can use.
Licensing and permissions guidance
Building and trade work: checked sources
On a small screen, scroll across to see every column.
| Location | Official source | What to check |
|---|---|---|
| NSW | Building Commission NSW | Anyone doing general residential building or trade work worth more than $5,000 in labour and materials including GST must hold a licence from Building Commission NSW. A written contract is mandatory once the price is over $5,000 including GST, and work valued between $5,000 and $20,000 must use a small works contract. For work over $20,000 including GST your builder must take out home building compensation (HBC) insurance and give you the certificate before taking a deposit or starting work. Licensing, contracts and insurance do not replace planning approval: most structural work, extensions and decks also need development consent or a complying development certificate.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| VIC | Building and Plumbing Commission | A builder or tradesperson must be registered with the Building and Plumbing Commission to carry out domestic building work worth more than $10,000, with limited exceptions for work that is only plastering, tiling or painting. The same $10,000 figure triggers the contract requirement: above it you must have a major domestic building contract in writing. Insurance changed on 1 July 2026 — for eligible contracts signed on or after that date, Home Warranty insurance is required above $20,000, replacing Domestic Building Insurance, which applied above $16,000 for contracts signed earlier. A building permit from a registered building surveyor, and planning approval where required, is a separate obligation.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| QLD | Queensland Building and Construction Commission | You need a QBCC licence to carry out building work valued over $3,300 including materials, labour and GST; handyman work at or under $3,300 is exempt provided it is not electrical or plumbing and needs no occupational licence. Written contracts are required at the same threshold in two tiers — a Level 1 regulated contract from more than $3,300 up to $19,999, and a Level 2 regulated contract over $20,000. Queensland Home Warranty Scheme cover is required on residential construction work valued at more than $3,300, and your contractor must pay the premium and give you the notice before starting. A building approval from your council or a private building certifier is a separate requirement for most structural work, extensions and decks.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| WA | Building and Energy | In most areas of Western Australia a builder carrying out building work worth $20,000 or more must be registered with Building and Energy; registration requirements differ in some remote parts of the state. The written-contract rule uses a lower figure: the Home Building Contracts Act 1991 applies to fixed-price home building contracts valued between $7,500 and $500,000, and contracts in that range must be in writing. Home indemnity insurance must be taken out by your builder for residential building work valued over $20,000, and you should see the certificate before paying a deposit or allowing work to start. A building permit from your local government is a separate approval for structural work, extensions and most decks.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| SA | Consumer and Business Services | South Australia sets no dollar threshold for licensing — anyone carrying on business as a building work contractor must hold a building work contractor's licence from Consumer and Business Services, whatever the job is worth. A written contract is mandatory once domestic building work is worth $20,000 or more, and it must show the contractor's licence number, be signed by both parties and come with Form 1, Your building contract: your rights and obligations. Building indemnity insurance is required where the work costs $20,000 or more and also requires development approval; that threshold rose from $12,000 on 10 November 2025, so older guides quoting $12,000 are out of date. Development approval through PlanSA or your council is separate from licensing, contracts and insurance.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| TAS | Building Standards Tasmania | From 1 October 2026 Tasmania's building regulation sits with Building Standards Tasmania, which took this function over from Consumer, Building and Occupational Services. Tasmania sets no dollar threshold for licensing: whether a licence is needed depends on the type of work, so a builder licence is required for building services work at any value, while paving, concreting, painting and landscaping need no licence. The written-contract threshold is separate — the Residential Building Work Contracts and Dispute Resolution Act 2016 applies at a contract price of $20,000 or more, and those contracts must be in writing, dated and signed by both parties, with the Residential Building Consumer Guide given to you before you sign. Approvals are risk-based rather than value-based: low-risk work needs no permit, notifiable work goes to a building surveyor, and permit work requires a building permit from the council.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| ACT | Construction Occupations Registrar | In the ACT licensing is tied to the nature of the work rather than its price: a builder must hold the relevant licence class to do or supervise work that requires building approval, and no dollar threshold starts the licence requirement. ACT legislation does not require a written contract for residential building work, although one is strongly recommended, and a contract for a house or for work over $12,000 cannot give the builder power to choose or remove your building certifier. Residential building work insurance, or a fidelity fund certificate, is required before work starts for new homes and for certain alterations or additions valued at $12,000 or more. Building approval is a separate obligation, and it is you as the landowner — not your builder — who appoints the building certifier.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| NT | Building Practitioners Board | The Northern Territory uses a single, much higher threshold than the eastern states, built around prescribed residential building work: work worth more than $25,000 on a house or unit, or an extension or renovation that increases floor area. You must use a registered building contractor for prescribed residential building work, and a written contract is legally required for it; below $25,000 neither obligation applies, though a written contract is still sensible. Instead of a warranty insurance policy the NT uses a fidelity fund certificate, which your builder must obtain for each qualifying job before getting a building permit or demanding payment — the triggering value rose from $12,000 to $25,000 on 30 March 2026, so older guides quoting $12,000 are out of date. A building permit is required for most building work, and in a building control area you must also engage an NT registered building certifier.Official source checked 2026-10-20. Confirm current requirements with the regulator. |
| Your location | Australian Business Licence and Information Service | Search the exact activity and location to find licensing, regulatory and council requirements. Follow through to the named authority and verify the provider separately. This lookup is not confirmation that a provider is licensed or a job is exempt.Official source checked 2026-10-14. Confirm current requirements with the regulator. |
This is not a complete register of requirements. Where a state-specific source has not been checked, use the government lookup. Qualified trade review is pending; no universal licence exemption is asserted.
Common mistakes
Leaving the task list open-ended
Agree each task and what happens if the booking runs out of time.
Assuming every trade is covered
Check the relevant licence requirements and the individual provider’s scope for specialist or regulated work.
Frequently Asked Questions
Which jobs can this provider do?
Ask the provider to confirm each task against their qualifications and licence scope. Use the official authority for location-specific requirements.
Is there a minimum charge?
Ask for the actual attendance fee, minimum booking, labour rate and material charges. FairCost does not have a verified universal minimum.
Got a quote for handyman work?
Check it against our price estimates in 30 seconds. Free, no signup, see our editorial policy.